PCB (Printed Circuit Board) Etching Machine Using ESP32-Camera Based Internet Of Things
DOI:
https://doi.org/10.32492/jeetech.v4i2.4208Keywords:
Printed Circuit Board, Etching, Real Time Clock, ESP32-Cam, Internet Of ThingsAbstract
Today's technology is automated. In car alarm devices, to automatic parking. This very rapid development of technology makes humans create equipment that can make it easier for humans. The etching process can also be called the Printed Circuit Board screen printing process, which is the creation of a path or layout that will connect between electrical components. PCB etching machine is a tool used to dissolve metal parts that are not designed on plain PCB boards using a mixture of chemical solutions, namely ferric chloride. Manual PCB processes usually take a long time and risk being exposed to ferrit chloride solutions for users. This article discusses how to make an automatic etching machine tool with a Microcontroller module that has a camera feature to monitor the editing results on a copper board. With the time method as the key to perfect results during the checking process. For as a driver, that is using a Servo Motor. The microcontroller used in this machine is an ESP32 camera based on the Internet of things Telegram as a Data Base media. For software design using fritzing software applications. The success of the PCB etching machine in this study is seen from testing tools ranging from voltage testing, microcontroller testing, real time a clock testing and Internet of Things system testing. From many of these tests, good results were obtained.
References
J. Tarantang, A. Awwaliyah, M. Astuti, and M. Munawaroh, “Perkembangan Sistem Pembayaran Digital Pada Era Revolusi Industri 4.0 Di Indonesia,” J. Al-Qardh, vol. 4, no. 1, pp. 60–75, 2019, doi: 10.23971/jaq.v4i1.1442.
J. Jamaaluddin, “Sistem Kontrol Pendingin Mobil Ramah Lingkungan Berbasis Android,” Cyclotron, vol. 2, no. 1, 2019, doi: 10.30651/cl.v2i1.2528.
A. Royan, “Implikasi Binery Search Untuk Volthering Sebagai Aplikasi Data Hadits Android,” J. Technopreneursh. Inf. Syst., vol. 2, no. 1, pp. 18–23, 2019, doi: 10.36085/jtis.v2i1.216.
M. V Tarihoran, “Mesin Etching Pcb (Printed Circuit Board) Menggunakan Arduino Nano,” Semin. Nas. Ilmu Terap., pp. 1–4, 2019, [Online]. Available: https://ojs.widyakartika.ac.id/index.php/sniter/article/view/134.
D. Sonda and M. Anwar, “Perancangan dan Pembuatan Alat Pelarut Pcb Secara Otomatis Menggunakan Sistem Kontrol Berbasis Mikrokontroler ATMEGA 32,” Voteteknika (Vocational Tek. Elektron. dan Inform., vol. 9, no. 2, p. 1, 2021, doi: 10.24036/voteteknika.v9i2.111325.
D. A. N. Waktu, L. Terhadap, and R. Logam, “Universitas indonesia,” 2012.
M. A. Pratama, A. F. Sidhiq, Y. Rahmanto, and A. Surahman, “Perancangan Sistem Kendali Alat Elektronik Rumah Tangga,” J. Tek. dan Sist. Komput., vol. 2, no. 1, pp. 80–92, 2021, doi: 10.33365/jtikom.v2i1.46.
A. Susatyo and C. Bariyah, “Perancangan Fasilitas Kerja yang Ergonomis pada Proses Pelarutan,” J. Integr. Sist. Ind., vol. 3, no. 1, pp. 7–14, 2016.
A. Nur, R. Ardiyantoro, and D. Susandi, “Pengenalan Kondisi Tanah Dengan Raspberry Pi Pada Drone Penyemprot Tanaman,” Pros. Semin. Nas. Ris. Inf. Sci., vol. 4, no. 2, pp. 71–76, 2022, [Online]. Available: https://tunasbangsa.ac.id/seminar/index.php/senaris/article/view/210.
A. Priyanto, S. Setiawidayat, and F. Rofii, “Design and Build an IoT Based Prepaid Water Usage Monitoring System and Telegram Notifications,” JEEE-U (Journal Electr. Electron. Eng., vol. 5, no. 2, pp. 197–213, 2021, doi: 10.21070/jeeeu.v5i2.1527.
G. R. Anandya, “Rancang Bangun Lengan Robot Penjepit PCB 3 Dof Berbasis Arduino Untuk Proses Etching PCB Otomatis,” p. 110, 2017, [Online]. Available: http://repository.its.ac.id/47867/.
A. Hilal and S. Manan, “Pemanfaatan Motor Servo Sebagai Penggerak Cctv Untuk Melihat Alat-Alat Monitor Dan Kondisi Pasien Di Ruang Icu,” Gema Teknol., vol. 17, no. 2, pp. 95–99, 2015, doi: 10.14710/gt.v17i2.8924.
T. Jaringan, A. A. Arsadi, and E. Haryatmi, “InfoTekJar : Jurnal Nasional Informatika dan Pemanfaatan Aplikasi Telegram dan Internet of Things pada Pemantauan Tempat Sampah,” vol. 2, 2021.
P. Rahardjo, “SISTEM PENYIRAMAN OTOMATIS MENGGUNAKAN RTC ( REAL TIME CLOCK ) BERBASIS MIKROKONTROLER ARDUINO MEGA 2560 PADA TANAMAN MANGGA,” vol. 8, no. 1, pp. 1–5, 2021.
A. Mathematics, 済無No Title No Title No Title, vol. 32. 2016.
A. Hermawan, N. H. Y, F. Teknik, U. N. Jakarta, and J. R. Muka, “Rancang Bangun Pembuat Layout PCB Otomatis Berbasis Android 123.”
S. C. S. Yanti and I. Sulistiyowati, “An Inventory Tool for Receiving Practicum Report Based on IoT by Using ESP32-CAM and UV Sterilizer: A Case Study at Muhammadiyah University of Sidoarjo,” J. Electr. Technol. UMY, vol. 6, no. 1, pp. 49–56, 2022, doi: 10.18196/jet.v6i1.14607.
. Jamaaluddin Jamaaluddin, Imam Robandi, Izza Anshory, Ahmad Fudholi, VERY SHORT-TERM LOAD FORECASTING OF PEAK LOAD TIME USING FUZZY TYPE-2 AND BIG BANG BIG CRUNCH (BBBC) ALGORITHM, ARPN, VOL. 15, NO. 7, APRIL 2020.
Published
How to Cite
Issue
Section
Copyright (c) 2023 Adi Prasetyo, Jamaaluddin Jamaaluddin, Izza Anshory
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
