Pembuatan Prototype Pendeteksi Suhu dan Disinfektan Otomatis Pada Laboratorium

Authors

  • Sotyohadi Sotyohadi Institut Teknologi Nasional Malang
  • Irmalia Suryani F Institut Teknologi Nasional Malang
  • Irrine Budi Sulistiawati Institut Teknologi Nasional Malang
  • Yoppy Aldya Institut Teknologi Nasional Malang

DOI:

https://doi.org/10.32492/jeetech.v5i1.5103

Keywords:

HC-SR04, TCRT 5000, MLX90614, Buzzer, Database

Abstract

When the pandemic occurred in 2019, disinfectant sprayers were needed for prevention, measuring body temperature at the entrance. The pandemic has been end, we still have to do this to prevent and be disciplined in healthy living. The research here will create a prototype of an automatic temperature detection and disinfectant device at the laboratory door. The laboratory location was chosen because mobility in the laboratory was conducive, if a trial was carried out it would not disturb the activity on laboratory. This spraying tool designed includes an HC-SR04 sensor for detecting the height of disinfectant liquid, a TCRT 5000 sensor for detecting a person's forehead which will take temperature measurements to the MLX90614 sensor. The buzzer sounds when the MLX90614 sensor detects a temperature above 370C. Spraying disinfectant liquid uses 2 0.2mm spayer nozzles, and a proximity sensor when detecting people passing by the spray booth.

References

R. N. Putri, “Indonesia dalam Menghadapi Pandemi Covid-19,” JIUBJ, vol. 20, no. 2, p. 705, Jul. 2020, doi: 10.33087/jiubj.v20i2.1010.

A. L. Larasati, D. Gozali, and C. Haribowo, “Penggunaan Desinfektan dan Antiseptik Pada Pencegahan Penularan Covid-19 di Masyarakat,” Maj. Farmasetika, vol. 5, no. 3, May 2020, doi: 10.24198/mfarmasetika.v5i3.27066.

A. D. Karisma et al., “Sosialisasi Pemanfaatan Desinfektan Sebagai Tindakan Preventif Infeksi Covid-19 di Lingkungan Tempat Tinggal,” SEWAGATI, Jurnal Direktorat Riset dan Pengabdian Kepada Masyarakat – DRPM ITS, vol. 5, no. no 2, pp. 150–155, Agustus 2021.

A. Razor, “Sensor Ultrasonik Arduino HC-SR04 : Cara Kerja dan Program,” 2020. [Online]. Available: https://www.aldyrazor.com/2020/05/sensor-ultrasonik-arduino.html

A. R. Putri and M. A. N. Susilo, “Rancang Bangun Bilik Penyemprot Disinfektan Otomatis Menggunakan Sensor Pir Hc-Sr501 Dan Sensor Ultrasonik Hc-Sr04,” JOEICT (Jurnal of Education and Information Communication Technology), vol. 5, no. No 2, pp. 9–20, Desember 2021.

H. Hartati, L. Dahlia, K. Kusnadi, V. Asih, P. Sokibi, and S. Parman, “Rancang Bangun Sistem Penyemprot Disinfektan Otomatis Berbasis Iot Untuk Mencegah Penyebaran Virus Corona,” JD, vol. 12, no. 1, p. 33, May 2022, doi: 10.51920/jd.v12i1.215.

R. Wulandari, “Rancang Bangun Pengukur Suhu Tubuh Berbasis Arduino Sebagai Alat Deteksi Awal Covid-19,” Prosiding SNFA (Seminar Nasional Fisika dan Aplikasinya), pp. 183–189, 2020.

F. R. Seke, “Sistem Kontrol Otomatis Misting Antiseptic Berbasis Mikrocontroller Untuk Meminimalisir Penyebaran Covid-19,” JSE, vol. 4, no. 2, Aug. 2020, doi: 10.32502/jse.v4i2.2511.

I. Paramudita, Tyas Ari Wahyu Wijanarko, Adinda Putri Amanda, and Prayoga Bakti, “Pengaruh Jarak Ukur Dan Jenis Termometer Inframerah Pada Hasil Pengukuran Suhu Tubuh Sebagai Skrining Awal Covid-19,” Jurnal Standardisasi, vol. 23, no. No 2, pp. 133–140, Jul. 2021.

Y. Rumengan, A. Z. Patiran, and E. Bevin, “Penyemprot Disinfektan Otomatis Berbasis Arduino Untuk Ruang Kelas Era New Normal: Arduino Based Automatic Disinfectant Sprayer For New Normal Classroom,” JISTECH, vol. 11, no. 2, pp. 1–10, Jun. 2023, doi: 10.30862/jistech.v11i2.106.

A. Syahrin, “Prototype Sistem Monitoring Temperatur Menggunakan Arduino Uno R3 Dengan Komunikasi Wireless,” jtm, vol. 5, no. 4, p. 48, Mar. 2017, doi: 10.22441/jtm.v5i4.1225.

L. Roza, H. N. Iman, F. Nursabrina, A. Nailufar, G. E. Hidayah, and A. S. Sulaeman, “Measuring Room and Object Temperature Using MLX90614 Infrared Temperature Based on Arduino,” timeinphys, vol. 1, no. 1, pp. 37–41, Feb. 2023, doi: 10.11594/timeinphys.2023.v1i1p37-41.

R. L. Singgeta and P. D. K. Manembu, “Implementasi Sistem Monitoring Penggunaan Air Minum Pada Multiple Dispenser Berbasis Iot,” RTJ, vol. 4, no. 1, pp. 127–133, Jan. 2021, doi: 10.31869/rtj.v4i1.2248.

L. Huang et al., “Research progress of multifunctional flexible proximity sensors,” Sensors and Actuators A: Physical, vol. 360, p. 114500, Oct. 2023, doi: 10.1016/j.sna.2023.114500.

Published

2024-01-10

How to Cite

[1]
S. Sotyohadi, I. Suryani F, Irrine Budi Sulistiawati, and Y. Aldya, “Pembuatan Prototype Pendeteksi Suhu dan Disinfektan Otomatis Pada Laboratorium ”, jeetech, vol. 5, no. 1, pp. 27-38, Jan. 2024.

Issue

Section

Articles