Desain Human Machine Interface (HMI) Pada Sistem Pencetak Genteng Otomatis
DOI:
https://doi.org/10.32492/jeetech.v5i1.5107Keywords:
Human Machine Interface, PLC, Tile Printing Machine, Pneumatic cylindersAbstract
Roof Tile Printing Machines are important equipment in the industry for printing roof tiles and managing the roof tile production process. This tile printing machine includes a press machine and conveyor that can be adjusted so that the system can operate optimally during production. Operating a tile printing machine requires a program that can control various machine functions, such as conveyor motors and pneumatic cylinders. These programs are generally implemented using a Programmable Logic Controller (PLC). Therefore, an automatic tile printing system based on PLC and HMI with pressure and current parameters was created. This system can control and monitor the tile printing system while operating via the HMI screen. This method is used to collect data related to working methods, diagrams, cable connections, PLC programs, and data management in the HMI. One method used involves components such as limit switches, pressure sensors, current sensors, and pneumatics. The data generated from these processes is processed in the PLC and displayed on the HMI screen. The results obtained from this system are capable of monitoring the tile printing process in real time via the HMI screen.
References
A. P. H and M. Iffan, “Pengaruh Keterampilan Kewirausahaan Dan Karakteristik Individu Terhadap Keberhasilan Usaha ( Survei Pada Industri Genteng Kecamatan Jatiwangi Kabupaten Majalengka ),” JEMBA, vol. 1, no. 1, pp. 73–83, Jun. 2021, doi: 10.34010/jemba.v1i1.5021.
G. N. Aulia, Y. Darusman, and D. Heryadi, “Peran Tenaga Kerja Wanita Pada Industri Genteng Di Desa Wanajaya Kecamatan Kasokandel Kabupaten Majalengka”.
R. C. Ningrum, “Desain Pengepakan Barang Dengan Counter Otomatis Menggunakan Plc Omron,” JIMEL, vol. 1, no. 2, pp. 51–57, Jan. 2021, doi: 10.33365/jimel.v1i2.634.
M. Razi, “Rancang Bangun Konstruksi Alat Pencetak Biobriket Dengan Sistem Elektro Pneumatik,” vol. 5, no. 2, 2021.
D. N. Prakoso, Y. Prasetyo, B. Winarno, and B. Triyono, “Design System Warning & Safety Escalator dengan HMI Berbasis PLC,” vol. 4, no. 2, 2023.
Y. Prasetyo, N. A. Hidayatullah, B. Artono, and B. Danu S, “Power Factor Correction Using Programmable Logic Control Based Rotary Method,” J. Phys.: Conf. Ser., vol. 1845, no. 1, p. 012045, Mar. 2021, doi: 10.1088/1742-6596/1845/1/012045.
Y. Prasetyo, D. N. Prakoso, R. Wicaksono, B. Triyono, and S. Triwijaya, “Analysis of Transformer Protection Systems Using Smart Relays for Electrical Energy Stability,” vol. 07, no. 03, 2023.
B. Triyono, Y. Prasetyo, B. Winarno, and H. H. Wicaksono, “Electrical Motor Interference Monitoring Based On Current Characteristics,” J. Phys.: Conf. Ser., vol. 1845, no. 1, p. 012044, Mar. 2021, doi: 10.1088/1742-6596/1845/1/012044.
I. Rifaldo and M. Yuhendri, “Sistem Monitoring Kecepatan Motor Induksi dengan HMI Berbasis PLC,” vol. 3, no. 2, 2022.
M. Saputra and Z. Ak, “Rancang Bangun Sistem Elektro Pneumatik Pada Mesin Press Briket,” vol. 6, no. 2, 2022.
M. Sofnivagi, M. Razi, and H. Hasrin, “Rancang Bangun Sistem Elektro Pneumatik Untuk Mesin Pencetak Biobriket,” JMST, vol. 4, no. 1, p. 45, Feb. 2020, doi: 10.30811/jmst.v4i1.1744.
M. H. Ridwan, M. Yuhendri, and J. Sardi, “Sistem Kendali Dan Monitoring Pompa Air Otomatis Berbasis Human Machine Interface,” vol. 4, no. 2, 2023.
Published
How to Cite
Issue
Section
Copyright (c) 2024 Yuli Prasetyo, Budi Triyono, Dimas Nur Prakoso, Raden Jasa Kusumo Haryo
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
