Rancang Bangun Pengumpan Shuttlecock Otomatis
DOI:
https://doi.org/10.32492/jeetech.v5i2.5209Keywords:
RFID, Sensor Ultrasonik, Arduino Uno, Alat Pengumpan Shuttlecock OtomatisAbstract
Badminton is one of the most popular sports in Indonesia. This sport not only improves health, but also develops physical, mental and strategic skills. Badminton is also one of the sports that makes Indonesia proud in the international arena thanks to the success of Indonesian badminton players in various world championships. To create reliable badminton players, a very strict training program and the best training facilities are needed, one of which is a drill training program in badminton that feeds continuously, this exercise is very effective depending on how long the ball feeder feeds. Therefore, an innovation to help a coach in training his students, especially in drill training, is an automatic shuttlecock feeder that can feed automatically with varied feeds and with a certain speed that has been programmed using a microcontroller, previously this automatic shuttlecock feeder tool has been made by Reza Kurniawan and Jaka Kurniawan. Still, in this research, the author added a security system using two sensors: an RFID sensor and an ultrasonic sensor.
References
R. Kurniawan, “ALAT PELONTAR SHUTTLECOCK OTOMATIS SEBAGAI Laporan ini disusun untuk memenuhi salah satu syarat menyelesaikan pendidikan DIPLOMA III PROGRAM STUDI TEKNIK ELEKTRONIKA,” Bandung, Jul. 2021.
Jaka Kurniawan and Sukardi, “Rancang Bangun Alat Pelontar Shuttlecock Otomatis Berbasis Mikrokontroller,” Jurnal Teknik Elektro Indonesia, vol. 4, pp. 125–136, Apr. 2023, Accessed: Dec. 25, 2023. [Online]. Available: https://doi.org/10.24036/jtein.v4i1.370
Yuni Astuti, “Pengaruh Metode Drill dan Metode Bermain Terhadap Keterampilan Bermain Bola Voli Mini (Studi Eksperimen Pada Siswa SD Negeri 14 Kampung Jambak Kecamatan Koto Tangah Kota Padang),” Jurnal Pendidikan Guru MI, vol. 4, 2017, Accessed: Dec. 26, 2023. [Online]. Available: https://doi.org/10.24235/al.ibtida.snj.v
A. Syaifuddin and N. Indardi, “PENGARUH METODE LATIHAN DRILL SMASHTERHADAP KETEPATAN SMASHATLET BULUTANGKIS PUTRA PB KSATRIA DEMAK,” Jurnal Pendidikan Jasmani, Kesehatan dan Rekreasi, vol. 4, 2023, Accessed: Mar. 03, 2024. [Online]. Available: https://doi.org/10.31539/e-sport.v4i1.7998
Hermawan Aksan, Mahir Bulutangkis. Bandung: Nuansa Cendekia, 2012.
M. Arif, “Bahan Ajar Rancangan Teknik Industri,” Deepublish, 2016.
Muhammad Kusnadi, Zaenal Abidin, and Arief Budi Laksono, “Rancang Bangun Alat Sistem Pendeteksi Jumlah Ketersediaan Slot Parkir Mobil Dalam Gedung,” J. JEETech, vol. 1, no. 1, pp. 31–36, Apr. 2020, doi: 10.48056/jeetech.v1i1.9.
M. Ikhwan Mardin, A. Ahmad, and W. Wardi, “Sistem Absensi Dosen Berbasis Radio Frequency Identification (RFID) Sebagai Perhitungan Honor Dosen,” J. JEETech, vol. 5, no. 1, pp. 14–26, Mar. 2024, doi: 10.32492/jeetech.v5i1.5102.
M. A. Haikal and M. Ali, “Solar Power Plant Optimization using Automatic Transfer Switch ( ATS ) and Low Voltage Disconnect ( LVD ),” vol. 6, no. 2, pp. 328–334, 2024, doi: 10.33650/jeecom.v4i2.
Nurus Sholeh, Koko Joni, and Miftachul Ulum, “Sistem Monitoring Kondisi Kendaraan Motor Injeksi Berbasis Mikrokontroler”, jeetech, vol. 1, no. 1, pp. 37-42, Apr. 2020.
Ayuni Finda Rika and Nuzul Hikmah, “Rancang Bangun Alat Pendeteksi Kendaraan Dari Arah Berlawanan Pada Tikungan Tajam Berbasis Arduino UNO”, jeetech, vol. 2, no. 1, pp. 40-46, May 2021.
Published
How to Cite
Issue
Section
Copyright (c) 2024 Andito Ramadhani, Nina Paramytha
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
