Rancang Bangun Tong Sampah Cerdas Menggunakan Suara Sebagai Media Informasi Berbasis Arduino Uno
DOI:
https://doi.org/10.32492/jeetech.v6i1.6108Keywords:
Mikrokontroller, Arduino Uno, Sensor ultrasonik, Tong sampahAbstract
Garbage is one of the problems that we often encounter in the community. One of the factors causing the accumulation of garbage is the lack of public awareness to dispose of garbage in its place. In this problem, it is necessary to have a smart trash can using sound information media which includes Ultrasonic Sensors as distance detectors and trash volume detectors, Servos are used to control the trash can cover, Speakers are used as information media, DFPlayer mini is used as a voice recorder and microcontrollers are used as input data processors from the components used. The trash can cover will open and close automatically by detecting humans at a distance of ≤ 30 cm then detecting the height of the trash from the trash can cover ≤ 10 cm then the trash can is full then the trash can cover will not open and emit information in the form of sound. The method used in this study is the experimental method, namely by designing, assembling, and testing a smart trash can system based on Arduino Uno. Testing was conducted to evaluate the performance of the sensor, and the voice module in responding to the presence of objects in front of the trash can. This research is useful for the community because it can increase awareness in disposing of garbage in its place through an interactive approach in the form of sound, thus supporting the creation of a cleaner and more orderly environment. In addition, scientifically, this research contributes to the development of science and technology, especially in the field of hardware that can be used as a basis for similar innovations in various fields of life.
References
B. K. Tembelang, “MICROCONTROLLER-BASED AUTOMATIC TRASH CAN APPLICATION TO EASE THE GARBAGE DISPOSAL PROCESS IN BEDAHLAWAK VILLAGE BEDAHLAWAK TEMBELANG DISTRICT,” vol. 5, no. 1, pp. 77–84, 2022.
M. I. Q. Sofyan, S. N. Asia, A. Info, and I. Of, “DESIGN OF A PROTOTYPE MONITORING SYSTEM FOR SCHOOL LIBRARY VISITORS USING RFID AND NODEMCU,” vol. 1, no. 4, pp. 333–340, 2021.
S. N. Asia and S. Rusman, Ismaun, “Prototype Design of Computer-based Digital Information Media Simulation Using AVR Atmega8535 Microcontroller,” vol. 6, no. 1, pp. 36–41, 2023.
R. Suwartika and G. Sembada, “Security System Design Using Solenoid Door Lock Based on Arduino Uno on Laboratory Doors at PT. XYZ,” J. E-Komtek, vol. 4, no. 1, pp. 62–74, 2020, doi: 10.37339/e-komtek.v4i1.217.
R. Y. Endra, A. Cucus, F. N. Afandi, and M. B. Syahputra, “Smart Room Model Using Arduino Microcontroller for Resource Efficiency,” Explor. J. Sist. Inf. dan Telemat., vol. 10, no. 1, 2019, doi: 10.36448/jsit.v10i1.1212.
A. Achmad and S. Syarif, “Design and Build a Room Fire Detection System Using an Arduino Microcontroller Based on the Internet of Things,” J. IT Media Inf. IT STMIK Handayani, vol. 10, no. 1, pp. 59–72, 2019.
T. I. Solihati, I. Nuraida, and N. Hidayanti, “Pemanfaatan Kardus Menjadi Tempat Sampah Pintar Berbasis Arduino UNO R3,” ABDIMAS J. Pengabdi. Masy., vol. 3, no. 2, pp. 342–350, 2020, doi: 10.35568/abdimas.v3i2.962.
Akhmad Irfansyah Salim, Yuliarman Saragih, and Rahmat Hidayat, “Implementasi Motor Servo SG 90 (Electronics Ingtegration Helmet Wiper),” J. Electro Luceat, vol. 6, no. 2, pp. 1–9, 2020, [Online]. Available: https://doi.org/10.32531/jelekn.v6i2.256.
U. Latifa and J. Slamet Saputro, “Arduino Uno-Based Arm Gripper Robot Design Using Labview Interface,” Barometer, vol. 3, no. 2, pp. 138–141, 2018, doi: 10.35261/barometer.v3i2.1395.
Arun Francis G, “Object Detection Using Ultrasonic Sensor Arun,” no. 6, pp. 207–209, 2019, [Online]. Available: http://radartutorial.en.
S. BETA and S. Astuti, “DIGITAL SCALES MODULE EQUIPPED WITH RGB LED AND MINI DFPLAYER,” Orbit, vol. 15, no. 1, pp. 10–15, 2019.
S. N. Rahman et al., “ARDUINO AS A SMART VIVARIUM CONTROLLER WITH NOTIFICATION USING ANDROID,” vol. 7, no. 4, pp. 260–269, 2020.
M. Anton, M. H. Basri, S. Sulistiyanto, and Y. Prasetyo, “Designing an Automatic Istiwa Clock Using Running Text and Speakers as Aids for Prayer Times at the Nurul Hidayah Al-Taqwa Mosque Mohammed,” JEECAE (Journal Electr. Electron. Control. Automot. Eng., vol. 5, no. 2, pp. 42–47, 2020, doi: 10.32486/jeecae.v5i2.630.
I. et al. Iswanti, “SMART HOME DESIGN WITH SMART SPEAKER AND NODEMCU,” J. Rekayasa Teknol. Nusa Putra, vol. 7, no. 1, pp. 26–34, 2020.
Published
How to Cite
Issue
Section
Copyright (c) 2025 Siti Nur Asia, Sofyan Sofyan, Husna Saleh, Muhammad Ikhwan Mardin, M Noor Fuad
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
