Rancang Bangun Mesin Pencacah Cup Dan Botol Plastik
DOI:
https://doi.org/10.32492/jeetech.v7i1.7104Keywords:
Plastic, recycling, Shredder machine, Arduino, RFID, PETAbstract
The issue of PET plastic waste has driven the development of an automatic shredder machine based on Arduino with RFID security. This research employs the R&D method, utilizing key components including the HC-SR04 ultrasonic sensor, DC motor, and RFID RC522 module. Test results demonstrate optimal performance with 96% sensor accuracy and a security system that only responds to registered cards. This device is effective for small-scale recycling, equipped with LED indicators and a buzzer alarm. Its main advantages are process automation and increased community participation in recycling. Future development can focus on capacity improvement by replacing blades with a crusher and IoT integration. This innovation offers a practical solution for plastic waste management while supporting the circular economy.
References
R. Napitupulu, L. Dwi Nita, P. Studi Perawatan dan Perbaikan MesinPoliteknik Manufaktur Negeri Bangka Belitung, P. Studi Perancangan Mekanik, and M. Program Studi Perancangan Mekanik Politeknik Manufaktur Negeri Bangka Belitung Kawasan Industri Air Kantung, “RANCANG BANGUN MESIN PENCACAH SAMPAH PLASTIK.”
G. Pramudi, H. I. Akbar, E. Rovianto, K. Kunci, and M. Pencacah, “Mesin Pencacah (Crusher) Daur Ulang Limbah Rosok Plastik untuk Revitalisasi Pengelolaan Limbah Plastik di Kabupaten Magelang,” 2024.
D. Sopyan and D. Suryadi, “PERANCANGAN MESIN PENCACAH PLASTIK KAPASITAS 25 KG,” 2020.
N. D. Anggraeni, A. E. Latief, and I. Dermawan, “31 Desi Anggraeni, Nuha, dkk; Analisa Kinerja Mesin Pencacah Botol Plastik Tipe Pet ANALISA KINERJA MESIN PENCACAH BOTOL PLASTIK TIPE PET,” Jurnal Teknik Mesin, vol. 5, no. 2, 2019.
D. Asnawati, I. Sumarlan, G. Darmayanti, S. Raudhatul Kamali, and S. Hamdiani, “PENGENALAN KODE RESIN PLASTIK PADA SISWA MENENGAH ATAS UNTUK MEMBANGUN GENERASI PEDULI LINGKUNGAN,” 2019. [Online]. Available: www.jwd.unram.ac.id
Franziska Maisel, Gergana Dimitrova, and Perrine Chancerel, “JU1Preparing WEEE plastics for recycling – How optimal particle sizes in pre-processing can improve the separation efficiency of high quality plastics,” vol. 154, no. How optimal particle sizes in pre-processing can improve the separation efficiency of high quality plastics, Mar. 2020, Accessed: Aug. 15, 2025. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0921344919305257?ref=pdf_download&fr=RR-2&rr=96f589464aceb596
N. Rahmi, “Pemungutan Cukai Plastik Sebagai Upaya Pengurangan Sampah Plastik,” JUPASI, 2021. [Online]. Available: http://ojs.stiami.ac.id
I. Sujana and F. Imansyah, “IMPLEMENTASI TEKNOLOGI TEPAT GUNA: KAJI TERAP MESIN PENCACAH PLASTIK UNTUK PENGOLAHAN SAMPAH SKALA KOMUNITAS,” Jurnal Abdi Insani, vol. 12, no. 6, pp. 2667–2676, Jun. 2025, doi: 10.29303/abdiinsani.v12i6.2609.
A. Wijaya and D. Juliadi, “RANCANG BANGUN ROBOT PEMBERSIH LANTAI MENGGUNAKAN ARDUINO NANO DENGAN SISTEM PENGENDALI BERBASIS ANDROID,” 2021. [Online]. Available: www.ejournal.unib.ac.id/index.php/pseudocode
Muhammad Kusnadi, Zaenal Abidin, and Arief Budi Laksono, “Rancang Bangun Alat Sistem Pendeteksi Jumlah Ketersediaan Slot Parkir Mobil Dalam Gedung,” J. JEETech, vol. 1, no. 1, pp. 31–36, Apr. 2020.
Published
How to Cite
Issue
Section
Copyright (c) 2026 Muhammad Echan Hardinata, Nina Paramytha
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
